3.6HP Outboard Motor,Outboard Engine,2-Stroke 55cc Electric Motor Boat Heavy-Duty Marine Motor Outboard Trolling Motor For Fishing, Aquaculture, Outdoor Adventure, Fishing Boat Engine Tiller Control

Displacement: 55CC

Bore Stroke: 4.4*3.3cm/1.73*1.30in

Dimensions: 36.5*22*92cm/14.37*8.66*36.22in

Transom Height:42cm/16.54in

Package Included

1x Outboard Motor

1x Funnel

1x Proportional Bottle

1x Pump Impeller

1x Spark Plug

1x Fuel Tank

1x English Instruction

1x Installation Tool Kit

1x Starter

All Accessories for Assembly

Notes

1.Please read the attached instruction manual completely before use. And pay particular attention to the safety instructions included.

2.Please add gear oil to the gears before using the motor and replace gear oil after the run-in period(10 hours).(If you do not know how to handle this, please ). Our outboard motor doesn't with oil of gear, please prepare it by yourself.

3.Do not touch or remove electrical parts when starting or during operation. Keep hands, hair, and clothes away from the flywheel and other rotating parts while the engine is running.

4.Please don't start the motor on the bank. If you want to test the motor, it should be done in the river. Please don't use the motor when it stops coming out of water.

5.When there is no water coming out of the motor, please stop using it immediately, and then check whether the pump impeller or the water outlet is blocked.

6.About the noise. All gasoline machines have noise, at the moment we do not test the decibels, but the noise is the same as a motorcycle, so it is a normal phenomenon.

7.The machine itself is light enough to be used on a boat under 100 kg and can carry 4 people, but the speed of one person and 4 people is definitely different. Please note that customers with high requirements for speed.

8.We can only provide Ce certification, no other certification can be provided, thank you for your understanding.

9.Clean the outboard engine with fresh water after sailing in seawater or turbid water. Do not leave the outboard engine out until the cooling water is completely used up. Otherwise, the water cam will enter the cylinder through the exhaust port. This will cause engine failure.

10.Use up the gasoline in the fuel tank before storing for a long time. The engine should be stored in a dry and well-ventilated place, avoiding direct exposure to sunlight.

11.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.